refresh Discussions

About 853 results - Page 1 of 86
  • Issue#608168: Refresh Date (Manual refresh)

    Hi everyone, I have a dashboard on power BI desktop that I refresh manually twice a day. I would like to display the refresh date on my dashboard.  Is it possible ?  Thanks.Zakaria....

  • Issue#669102: Making the BenQ W7500 Accept Real 120Hz Refresh Rate

    We all know the BenQ W7500 can do 120Hz in 3D, and has a native display of 60hz. According to articles I've read online, some displays allow you to push a *TRUE* 120Hz signal to it using certain tweaks from your PC to achieve proper 120fps motion even in non-3D mode. Here's one such article. http://www.blurbusters.com/overclock/120hz-pc-to-tv/ Has anyone attempted and has successfully forced a true 120Hz signal to any of the BenQ projectors without issues? ...

  • Issue#367425: Scheduled Refresh During SSAS Refresh

    Hi guys, I have a SSAS tabular. Some of the partitions are refreshed on an hourly basis. The SSAS is used as a datasource for a Power BI report, refreshed throught the EGW 8 times per day. There is a huge problem when the scheduled refresh runs simultaneoulsy with the refresh of the cube. When this happens, the refresh is reported as a successful one, however data in the Power BI report are not consistent , datasets contain partial information and the report is absolutel...

  • Issue#1109384: Refresh pulse when active (and cool down is finished)

    I'm not really sure if it is a bug or not, but it seems like the only skill you can't refresh when it's still up, and you're past the cooling sown time. Is it intentional?...

  • Issue#1168666: report map publish to web refresh problem

    Win 10 Edge; trialed on 2 machines In Power BI I delete the published URL - I create a new Publish To Web url When I paste that into a new browser I briefly see the correct map image but it then reverts to the prior data - however on another page the table data is refreshed. ;;;;;;;;  I got into this problem this way:a. refreshed the data in Power BI desk top - and used that Publish to Web feature b. I had previously published, so it prompted me to replaced - which I sel...

  • Issue#535721: PowerDVD 16 Ultra comments (firmware update needed to fix refresh rate bug)

    PowerDVD 16 Ultra comments PowerDVD 16 Ultra is what I am currently using, itÂ’s a small improvement compared to last years PowerDVD 15 Ultra version. I purchased the retail box version of PowerDVD 16 Ultra that comes with a CD-ROM and a 187 page PDF users guide. Appears to load discs a little faster compared to last yearÂ’s version. PowerDVD 16 Ultra also supports DSD bitstreaming to a A/V receiver and internal decoding of DSD to PCM. However PowerDVD 16 Ultra will not playback Super A...

  • Issue#601015: Spotify - [Friend Feed] Does not auto-refresh.

    The current friends feed does not auto refresh anymore (as of today). I have been listening for about 2 hours straight and it says all of my friends have not listened to anything new. Although when I close and repoen Spotify, it updates the friends feed and shows what songs my friends are listening to. OS: Windows 10Version: 1.0.28.87.g8f9312a4...

  • Issue#314890: Widget Refresh when returning to home page

    I came across mimic recently, as a long time amber user it was a breathe of fresh air. I have one annoyance I cannot seem to resolve. When i watch a tv show from my recommended episodes widget, when it finishes and returns to the home screen the episode I just watched is in the first location as if it wasn't watched. I've never seen this with any other skin so its a bit baffling. If I go into a show, hit stop and come back to the homepage then it updates correctly. I'm using emby for my back end...

  • Issue#123702: Cannot refresh data due to internal service error

    Is there a problem with the service today? I cannot refresh a dataset on powerbi.com that has always refreshed. Of course when I try to submit a ticket it says they are out of the office due to  President's Day....

  • Issue#728525: Video folder doesn't refresh.

    Unsure if this is the correct location so if not I apologize in advance. I have set a video folder with movie trailers as a source and set the folder to be accessed from the main menu. For some reason the list of files in the folder will not refresh even though files have been added and removed from the physical folder. This happens in a custom skin as well as the default skin I think is called conflence? The list the folder shows is old and half the files it it don't work because the video has...

  • Issue#786072: Windows Refresh Tool

    Almost a month ago, we reported that Microsoft is working on a new tool which will make clean installations of Windows 10 a lot easier. Today, the tool has been leaked and users can now try it out. The tool, which Microsoft is calling it “Refresh Windows” isn’t exactly what you’d expect it to be. With this tool, you can download Windows 10 and do a clean install of it — which you can already do with Microsoft’s Media Creation Tool. In addition to this, you might expect that Microsoft wil...

  • Issue#837630: Intel - HDMI Refresh under USB activity

    When connecting {or disconnect} a device to {any} usb port, the monitor displays the signal information. So when you connect a USB device it momentarily stops the HDMI signal. ***this also happens when changing songs via FOOBAR2000. ...

  • Issue#35436: Refresh Rate change results in flashing screen and loss of audio -- Help

    Hi, Recently I have been experiencing issues with kodi when it goes to play a video, the refresh rate changes from 60hz to 24hz the tv starts flashing like it's trying to do it but can't quite get it then it fails back to 60hz but the audio is dead until a reboot. This doesn't happen every time but at times it can take 10 resets before it manages to change the refresh rate successfully yet other times it might work first go. Initially I had this problem on openelec, so I tried KODI on windows...

  • Issue#381887: Mustang - 2018(?) refresh speculation

    I just watched a video from famous Youtuber/car reviewer SubaruWRXFan who has a lightly modified 2015 Ecoboost...he mostly loves the car but has talked about upgrading to a GT at some point, though he's looking to hold out for the impending refresh that he believes will come in 2018. That timing sounds about right...What do you guys think the refresh will include? Is there any chance of substantive mechanical upgrades? Will there be any effort to improve performance to stay competitive wit...

  • Issue#428779: Autodesk - Navisworks Refresh Time (Using .rvt files)

    Hi guys, I'm currently doing a large project in which there is a LOT of coordination involved. My company is handling the MEP/F. It's a Revit project. I want to set up a workflow where I make changes in Revit, Sync to Central, reload the NWF (which has the Revit files themselves appended) so I can coordinate, but currently its taking up to 15 minutes per reload in Navis. My company upgraded our computers with 32GB which I thought would be sufficient but still there is a very large sync time...

  • Issue#900972: Weather does not seem to refresh

    Is there a way to make kodi refresh the weather stats every X minutes? I have it so the weather shows at the bottom left of the screen Mine seems to show it as sunny and warm even though it's actually night. I never shut down the box but simply sleep it if that makes a difference? Basically I want kodi to simply refresh the weather say once every 60mins. Is that possible?...

  • Issue#960070: Unity - Ways to make things refresh themselves without using too many resources

    Hi! So everyone knows about Update, FixedUpdate and LateUpdate. However, using these can be expensive during gameplay. So what I was thinking was instead of using Update, why not run a script 2 times a second or so? For this I tried using an IEnumerator and StartCoroutine. However, I don't know how expensive a coroutine is, so I'm afraid this might be as expensive or more expensive than an Update. In other words, if you needed to run a script a few times a second, what would you do t...

  • Issue#1014632: Have Nvidia fixed multi monitor / multi refresh rate issue yet?

    I'm using GTX 1070 with 144hz as main monitor and 60hz as secondary monitor. Have to set 144hz down to 120hz to fix the stuttering, high temp and high core clock when idle. Have the windows 10 anniversary update or latest nvidia driver fix that yet?   P/s: I'm using Nvidia driver 368.81 ...

  • Issue#198808: ESET - JS/ScrInject.B trojan HTML/Refresh.BC trojan

    Hi Support,   I've tried to call your UK support number, but it's engaged.   This morning we're getting lots of notifications about the JS/ScrInject.B trojan HTML/Refresh.BC trojan, from staff seemingly visiting innocuous websites.   Could this signify some sort of outbreak, or a lot of false positives?   Some example links that trigger ESET:   http://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&ved=0ahUKEwjx78nO35zLAhXDXBoKHaPbD...

  • Issue#245880: Can't set scheduled refresh using enterprise gateway

    As title says, we are having trouble with scheduled refreshes through the enterprise gateway. We have the enterprise gateway installed on the database server however the dataset options for refresh schedule does not list the enterprise gateway. It is greyed out. Even though, under manage gateways, the gateway in question shows that the connection is online and good to go. I've read through the enterprise gateway documentation and according to that it should work. Has anyone had similar...

  • Issue#649625: Schedule Refresh Timings

    Hi,I am facing an issue in Schedule Refresh. Suppose if I scheduled it for 4.00 PM IST then it executes at 5.35 PM IST, if I schedulef it for 3.30 PM then it executes at 4.55 PM. It is taking time randomly.Do you have any idea how can I resolve this issue or its a bug. ...

  • Issue#717553: Gsync mode on refresh rate value in top left corner

     "Hi everyone I have an Acer XB270HU. As the title says when I turn on the g-sync mode a..."...

  • Issue#329684: Cards duplicating on feed refresh/pull

    I wasn't sure if I should call this a feed refresh, but when I hit the bottom of the currently displayed cards in the new feed, it will often times duplicate the last one or two cards on the pull...

  • Issue#1066227: Displays - MG279Q refresh rate

    This monitor is 144Hz, so then why is this.....   ...

  • Issue#1125655: Tableau - Refresh Data Source

    Loving Tableau 10's Google Docs Integration! Just one problem:When I clicked the refresh data source button a dialog came up asking if I was sure I wan't to refres—yada yada yada.I checked the "don't ask me again" box.Then I mistakenly hit the "no" button. Now when I refresh it doesn't ask me if I'm sure, but assumes I'm not and does not refresh my data. Is there anyway to fix this short of reinstalling?...