static Discussions

About 947 results - Page 1 of 95
  • Issue#107762: Static Nat Question

    I have a server inside my network that I want users to be able to access from the outside. To this end, I have setup a static nat between my internal address for this server (10.7.64.27) and one of the public ip addresses I have available (public2). Public1 is the outside address assigned to the interface.The problem I am having is in my routing and ACLs. I created and extended ACL that was something like this:Textper ip host 10.7.64.255 host public 2and a route that is something like this:Texti...

  • Issue#191148: Sony - Bravia KDL48W600B optical audio outputs static

    I recently purchased a Sony Bravia KDL48W600B tv and am having issues with the optical audio output. I am running the optical out to a DAC that is going into an amplifier. I have multiple devices going into the DAC and they are all fine, but the new tv only produces static sound (regardless of if I'm viewing a digital broadcast or a streaming video via one of the TV's apps). The optical cable seems to be fine. Most devices have a way to change the type of audio being output (stereo, mu...

  • Issue#1050896: 1.62 static pressure 120mm fan or 0.81 static 140mm fan for intake?

     "This is for an air cooled Define S. Should I go with 1500rpm 120mm Silent Wings 2 with..."...

  • Issue#1094073: Ubnt - Static route not working

    Hey guys so I am still new to Ubiquiti I am trying to rap my head around the following not working we have a EdgeMax PRO two ISP first one is on eth1(copper) and second eth7 (Fibre)I want to Failover both of them to my LAN bridge which is on eth6 (Fibre)  I have attempted to follow this guide https://help.ubnt.com/hc/en-us/articles/204952274-EdgeMAX-Policy-based-routing-source-address-based- I cannot seem to see where I am going wrong and why it is not working, when...

  • Issue#1133004: Sennheiser tr126: Sound great for a few minutes and then static

    I use head phone to listen to TV. I have just replaced battery which wasn't the problem. Headphones lose channel and reception is lost. All I can get is static. Sound is crystal clear for 3 - 5 minutes. ⟐ Edited by author August 27, 2016 at 7:41 am -0700...

  • Issue#1171907: Audio - Would an amp increase the amount of static sound coming from my old MB?

    My motherboard is old, soon 6 years I believe. I dont know what is wrong with it but sometimes I get a lot of static sound coming from it when I plug in the headset into the back. So I am considering buying an amp just to get rid of it, and I see two things that could happen and I dont know which one is right since I have little knowledge in the audio field. 1: The static sound will disappear since I no longer plug the headphones into the MB directly or 2: the sound will increase since I now a...

  • Issue#430: Dell - Static from AC511 soundbar

    Has anyone actually searched the web for this? At least two fixes have worked. One is wrapping aluminum foil on the back an bottom of the bar to provide shielding. The second was using a longer USB cable from the computer and not the monitor....

  • Issue#267111: Playstation - PS3 only outputs static

    Recently, my PS3 began acting up (same day as my folks', different topic).While playing a game (The Saboteur, if it matters) the screen suddenly filled with a green static and I was forced to hard-reset my console.Since then, I have gotten nothing but static when attempting to use my PS3.I did attempt to reset the output manually (holding the power button past power-on) and I was eventually able to get the picture up (prompting me to fix output settings).... For about twelve seconds.It is an old...

  • Issue#323821: Ubnt - NanoBeam Static or DHCP ?

    Hi Guys,I believe i know the answer to my question but need to make sure its right. I have setup a nanobeam link between two building needed over 450Mbps for high traffic. I switched of the main router today which supplies to the Station. The link hasnt picked up and IP. this is connected at the moment to a edge switch and a AC AP. On the controller the AC AP is connected. But the secont link has an IP 169.254.64.255 which it should have been around 192.168.0.x . To resolve this issue if theres ...

  • Issue#376048: Dell - Front Headphone Static/Buzz

    The thinly shielded cables used for front panel connectors are susceptible to EMI (electromagnetic interference) noise....

  • Issue#427841: Logitech G633 random loud static noise and audio cutouts?

    Note : Reposted this since the support never replied back to me on my last post. I'm having some problems with my new G366 headset where the audio randomyl cuts out for half a second, and then comes back as normal. However lately it's been even worse where the headset has suddenly played super loud static noise, so loud I can't even use them at all anymore. I've tried to do these things :  Unplug and replug into different port, and same portReinstall the Logitech Gaming ...

  • Issue#487400: Unity - 2D cartoon manga style animation with crossfades between static sprites?

    Hi! What would be the proper way to create animation for some parts of my 2D character in the style of classical cross-fade animation where you have just the start position sprite, then couple of frames of crossfade (blend) between the two sprites, and then the final position sprite? Or at most possibly an intermediate motion-blurred state in-between if it is a bigger movement. You know, like in older low budget TV cartoon series. I need this to create hand gestures for my hero. My graphic... ...

  • Issue#552694: Hey there is several types of pressure in report>surface integral like static pressur

    Hey there is several types of pressure in report>surface integral like static pressure-Total pressure-dynamic pressure-Relative pressure-absolute pressure….etc my question is which type of these can give the pressure drop along duct . my B.c inlet velocity and pressure outlet =0...

  • Issue#603229: Audio - Hyperx cloud 2 static

    I have a static noise on my new headset .when i turn on the pc i have no static , but every system sound i hear is basically the sound and theres satic noise in the background, i go into teamspeak , the second i press connect i start hearing static.  Another thing is that when i disable surround mode the static noise stops.  Please help? i didnt download anything for this headset but from articles online im not supposed to need a software ...

  • Issue#655987: How can or SHOULD I discharge static electricity?

    Hey all, will be building my rig soon and was wondering how should I discharge any static electricity? I was searching around, and found an article with different ways to do it, but wasn't sure which is the most reliable etc. I was planning on using the anti-static wrist strap method, but wasn't sure if the case (which I haven't ordered yet) is metal. Is this case metal? (are all cases metal? is this a stupid question??) link: https://www.shop.bt.com/products/thermaltake-versa...

  • Issue#709233: Skype - Static skype emoticons (not animating)

    Hello, Every time I open Skype the emoticons do not show an animation. They are static, basically. I've had this problem for quite some time and I haven't found a way to fix this yet. I have the latest version of Skype (7.24.0.104) and I'm running on Windows 8.1 Some people said that if you enable the "show animated emoticons" option that it fixes the issue, but this option has been enabled by default already as shown below: ï»¿ So my question is, does anyone know how to...

  • Issue#767535: Dell - XPS 13 - Quiet static noises?

    bump...

  • Issue#818230: [ubuntu] which type of static ip used in server??

    i m new on Ubuntu server.I had setup my server perfectly.I had set a static ip 192.168.1.23 to my server and i had also purchase the static ip 103.52.79.198 that i set to my router and on other part like DNS,Virtualmin and port forwarding i set 192.168.1.23 ip .Now my problem is that my website run on the device that are connected to my router.But i want to run my website on global network. How to do that? plzzz help me urgently.......

  • Issue#890535: ap is not showing static ip assigned to it in gui of 7005 but showing different ip even dhcp is off

    i have made  ap factory reset and i assigned new ip and master, its not showing in controller gui and its not broadcasting ssid also this is in regard to master and local setup ....... thank you ...

  • Issue#953574: Unity - Mixed mode lights aren't casting shadows of dynamic to static object (forward or deferred) (

    I have an entirely indoor scene with a single point light (soft shadows) plus ambient light illuminating it. Within the scene there are some objects which don't move and are set to the static layer (walls, floor, cupboards) and some objects which move and which are set to the dynamic layer (in particular, the hands the user waves around with his Vive controllers). This is a SteamVR Vive project. In lighting, both "Precomputed Realtime GI" and "Baked GI" are enabled. I a...

  • Issue#1001960: Linux - open source and no cost static analyzers of C

    I tried cppcheck and it's not bad. I looked at http://coccinelle.lip6.fr/documentation.php but that's not what I'm interested in. What I want to do is to analyze some C, take the result and study the areas that are flagged. Gcc is one way with all warnings but what other tools are used? ...

  • Issue#53727: Playstation - after signing in static appears then shuts off

    i try to sign into my ps4 and the screen turns staticy for a moment then turns off and it will not turn back on. Any ideas as to why this is happening? the system is only 5 months old....

  • Issue#246680: Logitech - Broken, Static sound in The Division with G933

     The Division just released and I can play for about 10-15 minutes before the sound starts tearing, with horrible static that actually HURTS my ears. I had this exact same issue with SMITE and was told to uninstall the Logitech Game Software. This worked... but its NOT a solution. Without that software, the sound quality is CRAP. I didn't pay the amount of money these cost to have basic stereo sound. What is a real solution? ...

  • Issue#141530: Static/Hiss Noise when I plug headphones into back of computer?

     "Hello guys, I've just recently built this computer it's also my first ever build. I'm..."...

  • Issue#149976: Radio Control - NIB-4 bladed P-51 Static prop for scale judging.

    I have this 1/6 scale static prop that can be painted and use for display purposes for Static judging or just good look for your P-51. Specs: 8 1/4" long blades with a 1 1/4" tang for mounting in the hub. 1' - 7 1/2" total diameter. You can just drill hole in your static spinner and plug the blades in the hub.. Prop $14.95 + $4.50 S&H I do not ship outside the US or other countries. Please give me your mailing address and please help me keep track of your order by typing ...